Gift Certificates Available

Online Ordering Available

About UsContact UsDirectionsTruck LidsTruck TopsAccessoriesEmploymentConversion Packages

 

 

 

 

 

 

HOPPY WIRING

Also referred to as (t-connectors), saves splicing your vehicles wiring, making it tow ready.

 

 

ADAPTERS

Hoppy Plug-In Simple Adapter - 7-Way RV Blade to 4-Wire Flat

Hoppy Plug-In Simple Adapter - 7-Way RV Blade to 4-Wire Flat

7-Way RV Blade to 4-Wire Flat Plug-In Simple! Adapters take the guesswork out of vehicle-to-trailer wiring. Pre-wired adapters allow the consumer to create a custom Plug-In Simple! wiring system appropriate for any towing situation.
 

 

Hoppy Plug-In Simple Adapter - 7-Way RV Blade to 6-round (Center Pin - Auxiliary)

Hoppy Plug-In Simple Adapter - 7-Way RV Blade to 6-round (Center Pin - Auxiliary)  

7-Way RV Blade to 6-Wire Plug-In Simple! Adapters take the guesswork out of vehicle-to-trailer wiring. Pre-wired adapters allow the consumer to create a custom Plug-In Simple! wiring system appropriate for any towing situation.

 

BRAKE CONTROLLERS

                         

BRAKE CONTROL - BRAKE-FORCE
  • LED Indicator shows trailer connection, braking function and short circuit notification. LED gradually changes from green to bright yellow as power setting is increased

 

BRAKE CONTROL - IMPULSE
  • Fully digital settings for power level (gain) with built in time- ramp
  • Easy to read digital power scale from 5% to 99%
  • Ability to invert digital display if desired mount is upside down

 

 

 

 

 

 

 

 

                     

BRAKE CONTROL - RELIANCE
  • Fully digital settings for power level (gain) with built in time- ramp
  • Easy to read digital power scale from 5% to 99%
  • Innovative vertical slide is easier to see and use than traditional horizontal slides
BRAKE CONTROL - AGILITY
  • Inertia accelerometer instantly activates brakes
  • Proportional controller mirrors the breaking action of the tow vehicle
  • On the fly sensitivity adjustment
  • Lifetime warranty
  • Short-proof protected

 

                  

 

TRAILER WIRING DIAGRAMS

Flat 4 Way Systems

4 way flat molded connectors allow basic hookup for three lighting functions; right turn signal / stop light (green), left turn signal / stop light (yellow), taillight / license / side marker (brown) and a ground (white).

Trailer wiring diagram

4 way plug mounted to tow vehicle

4 way tow vehicle side.

4 way plug that comes from the trailer harness

4 way trailer side.

 

 

6 Way Systems, Round Plug

Round 1 1/4" diameter metal connector allows 1 or 2 additional wiring and lighting functions such as back up lights, auxiliary 12v power or electric brakes. Note: The black (sometimes red) 12v and blue electric brakes wire may need to be reversed to suit the trailer. Check with a test light or VOM. Uses: horse trailer, travel trailers, landscaping trailer, car trailer, etc.

6 way picture

6 way socket that is attatched to the towing vehicle

6 way tow vehicle side.

6 way plug that comes from the trailer harness

6 way trailer side.

 

 

7 Way Systems

Round 2" diameter connector allows additional pin for auxiliary 12 volt power or backup lights. Uses: heavy duty landscaping trailer, car trailer, boat trailers, horse trailer, travel trailer, construction trailer, etc. Check with a test light or VOM.

7 way picture

7 way socket that is attatched to the towing vehicle

7 way RV flat blade tow vehicle side.

7 way plug that comes from the trailer harness

7 way RV flat blade trailer side.